BFTZH - BE SQUARE 195 WHITE AND AMBER

  • MSDS: BFTZH
  • Manufacturer: PETROLITE CORP BARECO DIV
  • Product Name: BE SQUARE 195 WHITE AND AMBER
  • National Stock Number: 9160-00-890-3883
Product Identification

Product ID:BE SQUARE 195 WHITE AND AMBER
MSDS Date:01/01/1987
FSC:9160
NIIN:00-890-3883
MSDS Number: BFTZH

Responsible Party
PETROLITE CORPORATION, BARECO DIVISION
6910 E 14TH STREET
TULSA, OK 74112-6618
US

Emergency Phone: (918)836-1601

Preparer: DGSC-SSH

Cage: 89331

Contractor
PETROLITE CORPORATION
TULSA, OK 74112 US

Telephone: 918-836-1601

Cage: 89331

Ingredients

MICROCRYSTALLINE WAX (FOOD GRADE) (USE TLV AS N.DUST

ACGIH TLV: 10MG/CUM(N.DUST

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS
Effects of Overexposure:HIGH CONC.OF WAX FUMES MAY CAUSE EYE,NOSE
RESPIRATORY IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR, GIVE CPR/O*2 I
NEEDED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;ING:RINSE MOUTH;
GET MEDICAL ATTEN FOR EYES,BREATHING DIFFICULTY,OR OTHER SYMPTOMS
OF OVER EXPOSURE.A BURN FR OM MOLTEN WAX SHOULD BE TREATED AS A
THERMAL BURN

Fire Fighting

Flash Point Method:COC
Flash Point:>500F/260C
Extinguishing Media:CO*2,FOAM,DRY CHEMICAL AND WATER
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA.
Unusual Fire/Explosion Hazard:WHEN FINELY DIVIDED AND SUSPENDED IN
AIR,THESE PRODUCTS COULD BE FLAMMABLE;USE CARE,AWAY FROM HEAT.

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;IF H
LIQUID,ATTEMPT TO CONFINE SPILL AND LET THE WAX SOLIDIFY;ONCE
SOLID,WAX MAY BE RECOVERED AS ANY OTHER MATERIAL.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:STORE AWAY FROM OPEN FLAME.BOILERS AND
STRONG OXIDANTS SUCH AS LIQUID CL*2,NA AND SODIUM HYPOCHLORITE.KEEP
TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT WITH EYES,SKIN AND CLOTHES;AVOID
BREATHING DUST.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR FOR DUST.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONG CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MSDS REVISED DATE:2/84.

Chemical Properties

HCC:N1
Spec Gravity:0.93
Evaporation Rate & Reference:NIL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE OR AMBER SOLID HAVING LITTLE OR NO ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:NONE NOTED

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.